Raise a signal for repeating count down

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[flash] is ON
[url] is ON
Smilies are ON
Topic review
   

If you wish to attach one or more files enter the details below.

Expand view Topic review: Raise a signal for repeating count down

Re: Raise a signal for repeating count down

Post by daan » Thu Aug 06, 2009 5:52 pm

Thanks, this is working the way I like it.

Re: Raise a signal for repeating count down

Post by Stopwatch » Thu Jul 30, 2009 3:19 pm

Try this.
xnsw.zip
1 sec pulse in Periodic and Close modes.
(148.87 KiB) Downloaded 2156 times

Re: Raise a signal for repeating count down

Post by daan » Mon Jul 27, 2009 5:39 pm

Creator wrote:I was not sure for how long time raise the signal therefore decided to leave it until reset. In periodic mode this means that signal is droped right before it is raised again. What period of pulse would you like?


The length of the pulse is not really important; it could be between one tenth of a second and 10 seconds. A typical repetition period for the count down timer is for me 30 seconds, or 1 or 2 minutes.

Re: Raise a signal for repeating count down

Post by Stopwatch » Sun Jul 26, 2009 3:18 pm

I was not sure for how long time raise the signal therefore decided to leave it until reset. In periodic mode this means that signal is droped right before it is raised again. What period of pulse would you like?

Raise a signal for repeating count down

Post by daan » Sun Jul 26, 2009 9:11 am

When I use the timer mode for a repeating count down, I use the Restart function. However, the "Raise a signal on port" function does not work properly in this set up: after the first count down, it gives a signal, but this signal stays forever. Is it possible to give a pulse at every count down, instead of a continuing signal on the port? I am currently using version 1.60.

Top

cron