Hope someone can help me out here
I have not found any post saying what volt´s you guys are running on you´re systems. My system is 24 volt and is running 2 clocks, one clock for 50 meters and the other for 100 meter (stop). I have 3 sensors, one to start both clocks and one to stop the 50 meter and one to stop the 100 meter.
I want to build a DB9 config so that this system can connect to the Xnote software but since my system is 24 volt I´m guessing that puts up a challenge :p
Or can I just build the DB9 configuration and run as is?
Maybe a link or tow for the hardware
Bjørn the Norwegian