Problems with external control by home made Race-Track-Timer

All discussions here

Problems with external control by home made Race-Track-Timer

Unread postby Jabse » Fri Jun 21, 2019 7:28 pm

Hello!

My english isn't pretty god. But I hope you understand me!

I am building an Race-track-timer.

But I don't know why the software starts/stops and resets the time in moments when it should not. Or it dosn't start/stop when it should be.

For example:

---> The time don't start/stop and the relay connect the RS-232 pin's (i hear and feel it). And the other way around. The relay dosn't connect the RS-232 pin's and the time starts/stops.

---> The time is reset although i only enabled start/stop funktion.

---> The time starts/stops/reset when I turn the traffic light to red. (There sould be no connection at all).

I have two videos on youtube where you can see it in action.

I hope someone can help me! Thanks in Advance!

Nr.1 https://m.youtube.com/watch?v=YWLaU6gSIT8&t=22s

Nr.2 https://m.youtube.com/watch?v=MM6mGQAIST4&t=12s
Jabse
 
Posts: 1
Joined: Tue Jun 18, 2019 4:01 pm

Re: Problems with external control by home made Race-Track-T

Unread postby Stopwatch » Sun Jun 23, 2019 6:54 am

Pins 1 and 9 are designated to reset (it's not documented). If your stopwatch resets accidentally that means there is an electromagnetic interference to them. The same here for the unintended start/stop. Also I see the contact bounce - start and immediat stop. The same for "not stopping" - actually it stops but starts imeddiately. Try to increase the bounce time.
Stay tuned.
Stopwatch
Site Admin
 
Posts: 428
Joined: Thu Feb 19, 2009 6:25 pm

Re: Problems with external control by home made Race-Track-T

Unread postby jasondrock » Wed Jul 22, 2020 9:22 pm

I cant get the pins 1 and 9 to reset the timer. i assume this is for the db9?
jasondrock
 

Re: Problems with external control by home made Race-Track-T

Unread postby Stopwatch » Fri Jul 24, 2020 12:36 pm

jasondrock wrote:I cant get the pins 1 and 9 to reset the timer. i assume this is for the db9?

Both 1 and 9 are inputs. Output voltage is supplied from 4 or 7.
Stopwatch
Site Admin
 
Posts: 428
Joined: Thu Feb 19, 2009 6:25 pm

Re: Problems with external control by home made Race-Track-T

Unread postby jasonrock » Mon Jul 27, 2020 10:21 pm

Stopwatch wrote:Pins 1 and 9 are designated to reset (it's not documented). If your stopwatch resets accidentally that means there is an electromagnetic interference to them. The same here for the unintended start/stop. Also I see the contact bounce - start and immediat stop. The same for "not stopping" - actually it stops but starts imeddiately. Try to increase the bounce time.
Stay tuned.


I cant get pins 1 and 9 to reset. does it work in current version?
jasonrock
 


Return to Main forum

Who is online

Users browsing this forum: No registered users and 5 guests