State: On-->Off/On-->Off in Ext.Control don't work

All discussions here

State: On-->Off/On-->Off in Ext.Control don't work

Unread postby mpegas » Wed May 05, 2010 5:25 pm

I try "Start/Stop" with state "On-->Off/On-->Off" in External Control and it don't work. State "Off-->On/Off-->On" don't work too. Other two states work properly, but I need exactly "On-->Off/On-->Off" state. Program version 1.60(newest for download). OS - WinXP home edition. The same thing with both ports: integrated and emulated with USBSerial adapter.
And very interesting thing: on other computer via USBto Serial adapter all states work properly. OS - WinVista Home Basic.
mpegas
 
Posts: 17
Joined: Sat Feb 06, 2010 9:45 am
Location: Lithuania

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby Stopwatch » Wed May 05, 2010 6:20 pm

Possibly this could occur after integrating reset with external control. Please try the newest download (sometimes updated silently with the same v.n.) at http://www.XNoteStopwatch.com/xnsw160.zip (the one at Download.COM can be not updated in time) on this "other computer".
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby mpegas » Thu May 06, 2010 3:26 pm

Version, downloaded from your posted link, don't work properly. But I copy all instalation files from "other computer" to PC with WinXP, and now have properly working stopwatch on both computers. Thank for idea.
mpegas
 
Posts: 17
Joined: Sat Feb 06, 2010 9:45 am
Location: Lithuania

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby Stopwatch » Fri May 07, 2010 11:52 am

It's not "properly working". How long did you hold push button? You must lag in the 1 sec.
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby mpegas » Sat May 08, 2010 10:56 am

I use infrared sensor with relay output and use stopwatch for automotive competitions. I can't regulate lag on sensor. State when relay output contacts are closed or opened is variable. I don't need reset on external control future.
mpegas
 
Posts: 17
Joined: Sat Feb 06, 2010 9:45 am
Location: Lithuania

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby perssoh1 » Sat May 08, 2010 3:51 pm

I have the same problem using state 4: On=>Off / On=>Off . The software doesnt trigg.
The other three states works normally.

Any other user with the same problem?

Dan
perssoh1
 

Re: State: On-->Off/On-->Off in Ext.Control don't work

Unread postby Stopwatch » Sun May 09, 2010 2:01 pm

perssoh1 wrote:I have the same problem using state 4: On=>Off / On=>Off . The software doesnt trigg.
The other three states works normally.

Yes, there was the error. I have fixed and reuploaded the file.
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm


Return to Main forum

Who is online

Users browsing this forum: No registered users and 140 guests