Spreadheet output for each start and stop

All discussions here

Spreadheet output for each start and stop

Unread postby Xnote123 » Fri Jan 14, 2011 9:37 pm

I have normally open contacts on my HVAC controller board, wired to pins 7/8 on a DB9 connector. Compressor turns on, contacts close and the XNote timer starts incrementing. Compressor turns off, contacts open and the XNote timer stops incrementing. So far so good!

Problem is, how can I get spreadsheet entries "Without" the snap feature? There is no way to "snap" on and "snap" off. I need to graph the time on, time off and correlate to interior and exterior temp data as well as power usage.

Any help is greatly appreciated. If we can make this work, I will GLADLY pay for the software. The XNote software is really useful and the gears are turning already.
Thanks,
John
Xnote123
 
Posts: 3
Joined: Fri Jan 14, 2011 9:32 pm

Re: Spreadheet output for each start and stop

Unread postby Stopwatch » Sat Jan 15, 2011 8:11 am

Xnote123 wrote:Problem is, how can I get spreadsheet entries "Without" the snap feature?

It will be added soon.
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm

Re: Spreadheet output for each start and stop

Unread postby Xnote123 » Sat Jan 15, 2011 12:44 pm

By soon you mean: Weeks, Months or Years? This feature would open a new world of functionality.

Thanks!
Xnote123
 
Posts: 3
Joined: Fri Jan 14, 2011 9:32 pm

Re: Spreadheet output for each start and stop

Unread postby Stopwatch » Sat Jan 15, 2011 1:42 pm

There are lots of other things. I can do a personal build if you are a registered user.
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm

Re: Spreadheet output for each start and stop

Unread postby Gwilljo » Wed Mar 23, 2011 6:33 am

Stopwatch wrote:There are lots of other things. I can do a personal build if you are a registered user.

Has this build been released yet? Even a beta would be good
Gwilljo
 

Re: Spreadheet output for each start and stop

Unread postby Stopwatch » Wed Mar 23, 2011 9:33 am

Gwilljo wrote:Has this build been released yet? Even a beta would be good

No.
Stopwatch
Site Admin
 
Posts: 439
Joined: Thu Feb 19, 2009 6:25 pm

Re: Spreadheet output for each start and stop

Unread postby justinkuo » Fri May 27, 2011 8:41 pm

This is a similar request. Currently, there is no simple mechanism to check if the operator inadvertently, stopped and restarted the timer. It would be a problem if the results of a road race were based on a paused clock. I would like to see XNote Stopwatch record the start and stop in the Results window.

Thank you. -- Justin
justinkuo
 
Posts: 1
Joined: Sun May 01, 2011 5:36 am
Location: Massachusetts


Return to Main forum

Who is online

Users browsing this forum: No registered users and 76 guests

cron